Serene Record Mat.
manage vibration.
A Suspension System for Vinyl
Less vibration beneath the record, more music above it.
The SERENE Mat creates a serene foundation for your records. Finely tuned sprung pads, each with a raised nib, centre the record’s weight onto the springs, which absorb micro-vibrations as they arise. The result is measurably less vibration across a broad range of frequencies.
Most mats are an accessory. This one is engineered
A mat has only a few millimetres to work with. To absorb vibration in that space, it has to flex.
A conventional mat is two or three millimetres of felt, cork or silicone, and a record is far too light to flex it.
SERENE’s sprung pads are tuned to flex. Getting that right took 29 iterations, tested through computer modelling. Then we listened, and our ears confirmed what the modelling found.
The results below show the difference.
Compared with Felt, Cork and Silicone
What this shows
The white line is the maximum potential vibration without a mat, shown flat as a simplified worst case because real vibration varies by setup. The blue area is what the SERENE Mat absorbs at each frequency.
What this shows
The same worst-case line, now with 3mm felt, cork and silicone mats added. Each coloured line peaks where that mat resonates, letting vibration back up towards the worst case. The SERENE Mat stays low across the frequency range.
Technical Details
Works with all weights of 7”, 10”, and 12” records
Specifically formulated silicone
4 tuned sprung pads (patent pending)
Compatible with non-screw pucks and weights (up to 500g)
Physical Specifications
Size
(D) 295.4mm (H) 3mm, Spindle Hole (D) 7.5mm
What’s Included?
1 x SERENE Record Mat

FAQs
The SERENE Mat is 3mm thick. Stock felt and rubber mats are often a little thinner, so on many turntables your arm will sit around a millimetre higher at the record than before.
If your arm has height adjustment, a small raise brings it back to where you had it. If it doesn’t, as with most Rega arms, you can still use the mat: owners from the Planar 2 up to the P10 and Naia run it, and one Rega P6 owner told us not to let the lack of VTA adjustment put you off.
Every system is different, so we can’t tell you exactly what you’ll hear. What owners mention first is the quiet: the background drops away, and detail that was always on the record comes forward, with sharper focus and more space around instruments.
The step tends to be biggest over a basic felt or rubber mat. On turntables whose platter is already heavily damped, some owners find the change more subtle.
The easiest way to find out is to try it at home for 60 days, and if it isn’t for you, we’ll take it back.
The SERENE Mat is 295.4mm across with a 7.5mm spindle hole. It sits on any flat platter at least that wide, including Technics SL-1200-series and DJ-style platters, where it sits inside the edge rather than hanging over.
If your platter has a raised rim, measure inside it: you’ll need at least 295.4mm for the mat to lie flat.
It was developed and listened to on both sprung and rigid turntables, belt and direct drive alike.
Yes. Remove your current mat and place the SERENE Mat directly on the clean platter, flat side down with the pads facing up.
The sprung pads were tuned sitting on the platter. Putting another mat underneath raises your arm height further and adds a layer the design wasn’t modelled for.
Record weights and pucks that simply sit on the spindle are fine up to 500g, including the SERENE Stabiliser. Screw-down clamps aren’t compatible: they press harder than the sprung pads are designed for, so the pads can’t do their job.
The mat works with 7-inch, 10-inch and 12-inch records.
Clean the platter, lay the mat flat side down with the four pads facing up, line up the spindle hole and place your record on top.
If you check tracking force, do it with the mat and a record in place, just as you’ll play.
Most owners describe a quieter background, tighter bass and more space, rather than a shift in tonal balance.
It does change how a record behaves, though, and in a few systems, often ones already set up to sound relaxed, owners have found the result a little too full in the bass. If that happens with yours, the 60-day home trial is there for exactly that.
Try it at home for 60 days. If it’s not for you, we’ll arrange collection, cover the return costs and give you a full refund, subject to the parts being complete and undamaged.
The SERENE Mat isn’t sold as an anti-static mat, and we haven’t measured static. Several owners have told us static dropped noticeably after switching to it.
Get in Touch
Speak with our team for advice on improving your system’s performance.
Buy the SERENE Mat

SERENE Record Mat
description
£75.00inc. VAT
- 60 Day Money-back GuaranteeFull refund, free collection
- Free ShippingOn orders over £250
- Regional FulfilmentDispatched within 2 working days
- Highly Rated on TrustPilotRated “Excellent” by our customers

Developed in Tandem
The SERENE Mat works beneath the record; the Stabiliser works above it, resting on the label.
The SERENE Mat offers a unique, deformable design featuring precisely tuned sprung pads that absorb micro vibrations before they can reach the record. Serving as a SERENE foundation for your records, it enhances the overall listening experience by revealing hidden layers of music that might otherwise remain unnoticed. Backed by detailed measurements, this mat significantly improves clarity and depth, uncovering nuances in your vinyl for a richer, more immersive sound.
The Mat consists of finely tuned sprung pads, each with a raised nib that centres the record’s weight onto the springs. This focused weight activates the springs, allowing them to absorb micro-vibrations that conventional mats can’t address. Crafted from a specially formulated silicone, the patent-pending SERENE Mat isolates the record from distortions, enhancing clarity and revealing hidden details in your music.
UK orders ship from our UK warehouse, with UK VAT included.
All European orders ship from our warehouse in the Netherlands, with your country’s VAT included at checkout, so there are no import duties to pay on delivery.
All US orders ship domestically from our US fulfilment centre. A 10% price adjustment covers pre-paid import costs, so the price you see is the price you pay, with no customs delays.
All Australian orders ship from our Australian fulfilment centre. A single location-based price adjustment covers GST, import handling and processing upfront, so the price you see at checkout is the final price you pay.
Orders to the rest of the world ship from our UK warehouse and are shown without VAT. Local import duties and taxes may be charged on delivery.
The SERENE Mat is 3mm thick. Stock felt and rubber mats are often a little thinner, so on many turntables your arm will sit around a millimetre higher at the record than before.
If your arm has height adjustment, a small raise brings it back to where you had it. If it doesn’t, as with most Rega arms, you can still use the mat: owners from the Planar 2 up to the P10 and Naia run it, and one Rega P6 owner told us not to let the lack of VTA adjustment put you off.
Every system is different, so we can’t tell you exactly what you’ll hear. What owners mention first is the quiet: the background drops away, and detail that was always on the record comes forward, with sharper focus and more space around instruments.
The step tends to be biggest over a basic felt or rubber mat. On turntables whose platter is already heavily damped, some owners find the change more subtle.
The easiest way to find out is to try it at home for 60 days, and if it isn’t for you, we’ll take it back.
The SERENE Mat is 295.4mm across with a 7.5mm spindle hole. It sits on any flat platter at least that wide, including Technics SL-1200-series and DJ-style platters, where it sits inside the edge rather than hanging over.
If your platter has a raised rim, measure inside it: you’ll need at least 295.4mm for the mat to lie flat.
It was developed and listened to on both sprung and rigid turntables, belt and direct drive alike.
Yes. Remove your current mat and place the SERENE Mat directly on the clean platter, flat side down with the pads facing up.
The sprung pads were tuned sitting on the platter. Putting another mat underneath raises your arm height further and adds a layer the design wasn’t modelled for.
Record weights and pucks that simply sit on the spindle are fine up to 500g, including the SERENE Stabiliser. Screw-down clamps aren’t compatible: they press harder than the sprung pads are designed for, so the pads can’t do their job.
The mat works with 7-inch, 10-inch and 12-inch records.
Clean the platter, lay the mat flat side down with the four pads facing up, line up the spindle hole and place your record on top.
If you check tracking force, do it with the mat and a record in place, just as you’ll play.
Most owners describe a quieter background, tighter bass and more space, rather than a shift in tonal balance.
It does change how a record behaves, though, and in a few systems, often ones already set up to sound relaxed, owners have found the result a little too full in the bass. If that happens with yours, the 60-day home trial is there for exactly that.
Try it at home for 60 days. If it’s not for you, we’ll arrange collection, cover the return costs and give you a full refund, subject to the parts being complete and undamaged.
The SERENE Mat isn’t sold as an anti-static mat, and we haven’t measured static. Several owners have told us static dropped noticeably after switching to it.

Turntable Accessories
SERENE Record Stabiliser
£195.00 – £210.00

AUVA
AUVA 50 Loudspeaker Isolators
£163.13 – £435.00

AUVA
AUVA 70 Loudspeaker Isolators
£327.00 – £840.00

AUVA
AUVA 100 Loudspeaker Isolators
£478.56 – £1,240.00

Equipment Stands & Isolation Pads
AUVA SW Subwoofer Isolators
£325.00

Equipment Stands & Isolation Pads
AUVA EQ System Isolators
£54.00 – £198.00

AUVA
AUVA Isolation Platform
£1,440.00

Networking Accessories
SmoothLAN Network Filter
£240.00

Networking Accessories
SmoothLAN Network Regenerator
£750.00

Accessories
Spikes x 24
£18.00

Accessories
Thread Adapters
£26.40

Accessories
CSA Insert Replacements
£42.00 – £48.00
