Serene Stabiliser.
Vibration control for vinyl.

A Turntable Stabiliser Designed for Controlled Energy Dissipation
The SERENE Stabiliser is designed to control micro-vibrations at the record surface, a source of interference often left unmanaged by conventional record weights and clamps. Using Stack Audio’s Tension-Activated Particle Absorption (TAPA) system, it manages this energy without relying on added mass.
How the Serene Stabiliser Controls Vinyl Vibration
The SERENE Stabiliser addresses micro-vibrations through Tension-Activated Particle Absorption (TAPA, patent pending), a hybrid damping system combining a tensioned membrane and particle absorption.
A central hub sits over the spindle while the aluminium body applies even pressure across the record label, creating controlled tension within the membrane.
This tension dissipates vibrational energy directly, while simultaneously increasing particle excitation, allowing the lightweight particles to respond more freely and absorb what remains.

Weight isn’t a Complete Solution Get better Clarity with TAPA
While a record weight or clamp can help flatten a warped record, it also changes how vibrational energy behaves at the record surface. By adding rigidity, it can restrict natural energy dissipation, potentially masking detail and reducing the system's ability to resolve low-level information.
Technical Details
The SERENE Stabiliser is a record player stabiliser designed to sit on the spindle, featuring a dual-mechanism that combines particle impact damping with a tensioned silicone membrane for effective vibration control.
Compatible with both rigid and suspended turntables, including models like the LP12, it keeps a lightweight build to minimise stress on the motor and bearings: 85g for the Standard and 95g for the Long. Both measure 77mm in diameter, the Standard standing 25mm high and the Long 29mm. The Standard suits spindles reaching up to 14mm above the record, the Long up to 23mm.

Physical
Specifications
What’s Included?
1 x SERENE Stabiliser
FAQs
The SERENE Stabiliser comes in two versions: Standard, for spindles up to 14mm tall, and Long, for spindles up to 23mm.
When it’s fitted correctly, the body sits evenly on the record label. If it hovers above the label, your spindle is too tall for that version. Spindles taller than 23mm aren’t currently supported.
If you’re not sure which you need, send us your turntable model and we’ll tell you.
Yes. Rega and Linn advise against heavy record weights, because extra mass above the spindle can load the bearing and upset a suspended deck. The SERENE Stabiliser isn’t a weight: the Standard version is 85g and the Long version 95g, a fraction of a traditional record weight, and it’s designed not to overload the turntable.
Rega owners from the Planar 2 up to the P10 and Naia use it, as do many LP12 owners.
A record weight has always meant mass. The SERENE Stabiliser takes a different approach: rather than pressing down on the record, it absorbs vibration right at the record surface.
The aluminium body sits on the label and the central hub stretches a silicone membrane taut, like a drum skin. That tension activates lightweight particles above it, which collide and turn vibration into heat. We call this Tension Activated Particle Absorption.
No. The Stabiliser works on its own, on top of the mat you already use. The two are designed to work together, though, with the mat underneath the record and the Stabiliser on the label, and many owners go on to pair them.
Every system is different, so we can’t tell you exactly what you’ll hear. What customers tell us about most is the bass: tighter, deeper and better controlled. After that, it’s detail they hadn’t heard before, more space around instruments, and voices sitting more solidly in the room.
The easiest way to find out is to try it at home for 60 days.
No. It does apply gentle pressure, so it will help with a slight dish, but flattening isn’t what it’s for. If much of your collection is warped, a screw-down clamp will do more to flatten records.
Yes. The Stabiliser sits on the record label, so it works with most mats, including felt, rubber and cork.
The Standard (14mm) version weighs 85g, and the Long (23mm) version weighs 95g.
Try it at home for 60 days. If you don’t feel it’s a significant enhancement, we’ll arrange collection and refund you in full, subject to the parts being complete and undamaged.
Get in Touch
Speak with our team for advice on improving your system’s performance.
YouTube Reviews
Buy the SERENE Stabiliser

SERENE Record Stabiliser
description
£195.00inc. VAT
- 60 Day Money-back GuaranteeFull refund, free collection
- Free ShippingOn orders over £250
- Regional FulfilmentDispatched within 2 working days
- Highly Rated on TrustPilotRated “Excellent” by our customers

Developed in Tandem
The Stabiliser works above the record; the SERENE Mat works beneath it, on finely tuned sprung pads.
The SERENE Record Stabiliser fits over the turntable spindle and rests on the label, designed to absorb micro-vibrations from multiple sources, including the stylus, acoustic feedback, and other ambient noise. Its dual-mechanism design helps intercept these micro-vibrations before they reach the cartridge, allowing the stylus to track the groove with greater clarity. By lowering noise at this sensitive point, the SERENE Stabiliser enhances subtle details and spatial depth, creating a more natural and immersive sound experience.
The SERENE Stabiliser is designed specifically to absorb micro-vibrations through its Tension-Activated Particle Absorption (TAPA) system rather than simply flattening the record. By dynamically managing vibrations with a flexible, lightweight approach, it preserves the music’s natural dynamics, delivering clear, balanced sound without the tonal shifts that can occur with heavier clamps or weights.
Key features
- Dual-mechanism design: combines particle impact damping with a tensioned silicone membrane (the TAPA system).
- Works with rigid and suspended turntables: compatible with turntables like the LP12.
- Lightweight build: approximately 85g (Standard) / 95g (Long) to reduce stress on the motor and bearings.
- Compact size: 77mm in diameter and 25mm in height.
- Spindle compatibility: fits spindle heights up to 23mm from the top of the record — available in Standard (14mm) and Long (23mm) versions.
- Covered by the Stack Audio 60-day money back guarantee.
UK orders ship from our UK warehouse, with UK VAT included.
All European orders ship from our warehouse in the Netherlands, with your country’s VAT included at checkout, so there are no import duties to pay on delivery.
All US orders ship domestically from our US fulfilment centre. A 10% price adjustment covers pre-paid import costs, so the price you see is the price you pay, with no customs delays.
All Australian orders ship from our Australian fulfilment centre. A single location-based price adjustment covers GST, import handling and processing upfront, so the price you see at checkout is the final price you pay.
Orders to the rest of the world ship from our UK warehouse and are shown without VAT. Local import duties and taxes may be charged on delivery.
The SERENE Stabiliser comes in two versions: Standard, for spindles up to 14mm tall, and Long, for spindles up to 23mm.
When it’s fitted correctly, the body sits evenly on the record label. If it hovers above the label, your spindle is too tall for that version. Spindles taller than 23mm aren’t currently supported.
If you’re not sure which you need, send us your turntable model and we’ll tell you.
Yes. Rega and Linn advise against heavy record weights, because extra mass above the spindle can load the bearing and upset a suspended deck. The SERENE Stabiliser isn’t a weight: the Standard version is 85g and the Long version 95g, a fraction of a traditional record weight, and it’s designed not to overload the turntable.
Rega owners from the Planar 2 up to the P10 and Naia use it, as do many LP12 owners.
A record weight has always meant mass. The SERENE Stabiliser takes a different approach: rather than pressing down on the record, it absorbs vibration right at the record surface.
The aluminium body sits on the label and the central hub stretches a silicone membrane taut, like a drum skin. That tension activates lightweight particles above it, which collide and turn vibration into heat. We call this Tension Activated Particle Absorption.
No. The Stabiliser works on its own, on top of the mat you already use. The two are designed to work together, though, with the mat underneath the record and the Stabiliser on the label, and many owners go on to pair them.
Every system is different, so we can’t tell you exactly what you’ll hear. What customers tell us about most is the bass: tighter, deeper and better controlled. After that, it’s detail they hadn’t heard before, more space around instruments, and voices sitting more solidly in the room.
The easiest way to find out is to try it at home for 60 days.
No. It does apply gentle pressure, so it will help with a slight dish, but flattening isn’t what it’s for. If much of your collection is warped, a screw-down clamp will do more to flatten records.
Yes. The Stabiliser sits on the record label, so it works with most mats, including felt, rubber and cork.
The Standard (14mm) version weighs 85g, and the Long (23mm) version weighs 95g.
Try it at home for 60 days. If you don’t feel it’s a significant enhancement, we’ll arrange collection and refund you in full, subject to the parts being complete and undamaged.

Turntable Accessories
SERENE Record Mat
£75.00

AUVA
AUVA 50 Loudspeaker Isolators
£163.13 – £435.00

AUVA
AUVA 70 Loudspeaker Isolators
£327.00 – £840.00

AUVA
AUVA 100 Loudspeaker Isolators
£478.56 – £1,240.00

Equipment Stands & Isolation Pads
AUVA SW Subwoofer Isolators
£325.00

Equipment Stands & Isolation Pads
AUVA EQ System Isolators
£54.00 – £198.00

AUVA
AUVA Isolation Platform
£1,440.00

Networking Accessories
SmoothLAN Network Filter
£240.00

Networking Accessories
SmoothLAN Network Regenerator
£750.00

Accessories
Spikes x 24
£18.00

Accessories
Thread Adapters
£26.40

Accessories
CSA Insert Replacements
£42.00 – £48.00



